UV Series
Commercial & Institutional Unit Ventilator
Unit Ventilators are made by the Heat Transfer Division of Engineered Air in four basic models, all in either draw through or blow through coil configurations. The four models are traditional vertical, horizontal ceiling, single fan horizontal ceiling and floor to ceiling riser style. All models are available with self-contained DX cooling and/or Heat Recovery options.
Related Products
Features
- Four models to choose from
- Units from 600 to 2400 CFM
- Self-contained DX units available
- Custom built to specific dimensions
- Standard 16 gauge construction (14 gauge optional)
- Electrostatically applied baked polyester powder coat textured paint
- Multiple access panels
- Large piping pockets
- Allen key camlock fasteners
- Standard 14 gauge fan boards and all steel housing with galvanized steel blowers
- Optional slide out fan boards
- 1 inch 3 pound per cubic foot insulation
- Engineered Air manufactured high capacity coils
- Stainless steel drain pans with cross breaks and positive slope
- Efficient permanent split capacitor motors
- Water, glycol, steam, DX or electric coil options c/w face and bypass if desired
A Unit Ventilator for Every Application
HUV Series (Horizontal Multi-Fan)
The HUV Series unit ventilator for concealed or exposed ceiling installations rounds out our family of unit ventilators. The HUV can be installed exposed (below the ceiling), flush mounted or concealed. All of our unit ventilators can be supplied with your choice of steam, water or electric heating coils and DX or water cooling coils. Duct discharge or integral grilles are available.
RUV Series (Riser Style)
The small footprint of the RUV Series means more usable floor area. With vertical up and down flow, blow through and draw through models, Engineered Air has an arrangement for every situation. The RUV base height is adjusted to suit any floor to ceiling dimension. All Engineered Air unit ventilators feature sloped stainless steel drain pans for positive condensate removal and long life. Lateral discharge ducts of rugged 16 gauge steel can be provided for down flow units. Lateral ducts have integral pencil proof louvres and are available in matching colours.
SUV Series (Horizontal Single Fan)
The SUV Series single fan ceiling mounted unit ventilator may be just what you need. The linear arrangement could solve that tight ceiling problem. The 14 gauge fan board and full 1’ acoustic insulation, standard on all Engineered Air unit ventilators, insures quiet operation. Recessed installations have bottom access with optional hinged doors. For fully concealed SUV units, side access is recommended.
VUV Series (Vertical Floor Mounted)
The VUV Series unit ventilator with its traditional arrangement is well known. Engineered Air brings a breath of fresh air to older buildings with our custom, built to fit replacement units. All models are capable of 0 to 100% outside air. The VUV is typically floor mounted on an exterior wall where fresh air is readily accessible.
Engineered Air can also provide any of the models with self-contained DX cooling. This eliminates the need for outdoor condensing units that are subject to vandalism and damage. Using quiet and efficient scroll compressors provides cooling in areas that are occupied year round and allows the central plant to be shut down during idle times.
*Due to continuous product development, specifications, dimensions and capacities are subject to change without notice.