FR / EN

Induction Series

ACB Series Active Chilled Beams Active chilled beams use dehumidified air from the building’s ventilation system (primary air) to pressurize a plenum inside the beam.  The primary air then flows through nozzles at high speeds.  These high-speed airstreams entrain room...

SHX Series

SHX Series Commercial & Industrial Gas Fired Steam Humidifiers The SHX Series gas fired humidifiers have an efficiency of 90% at high fire.  As the humidifier is turned down, this efficiency improves.  The NextGen controller, an Engineered Air controller...

DE Process Direct Fired

DE Series DE Series Spray and Bake The DE Series has been developed mainly for paint-booth applications.  During the painting or “spray” mode, this equipment operates as a direct fired make up air heater.  During the curing process, or “bake” mode, the heater will...

PACK Indirect Fired Units

PACK Series Indirect Fired Heating, Ventilating & Make Up Air Heaters The PACK Series provides an economical solution for heating requirements with airflow rates from 1,200  to 18,000 CFM (566 to 8,496 L/s).  The gas input capacities range from 150 to 400 MBH (44...

MP Modular Pump Skids

MP Series Commercial & Industrial Pump Skids The MP Series pump skids have been developed for hydronic pumping applications for chillers, heat pumps, air handlers with hydronic heating and cooling coils, and any other hydronic pumping applications.  Single, dual...

Green Burn

“Green Burn” Burner The Engineered Air exclusive “Green Burn Burner” is the cleanest burning on the market today. The HE Series make up air heater meets all the current ANSI and CSA standards for direct fired units, and is certified by ETL. This assures...

HRRF Series

HRRF Series  Packaged Thermal Storage Recovery Systems The thermal storage recovery systems utilize two separate blocks of heat storage cassettes to absorb, store and release heat from and to air streams. This proven technology provides air to air energy recovery with...

MH Modular Water Source Heaters

MH Series Commercial & Industrial Heat-to-Water Heating Heat Pumps The Engineered Air MH Series is a line of modular, non-reversing, heating heat pumps that supply leaving condenser water temperatures up to 160°F (71.1°C). The source (evaporator inlet) fluid...

UPW/HP Water Source Heat Pumps

UPW/HP Series Commercial & Industrial Non-Reversing Ground Source Heat Pumps Engineered Air’s FW/HP Series can operate with closed loop glycol (or water) heat pump systems. The efficiency of a ground source heat pump system is measured by the coefficient of...

FWH Air Source Heat Pumps

FWX(E)H Series Commercial & Industrial Reversing Air Source Heat Pumps The FWX(E)H Series of packaged units has been developed to provide both cooling and heating by taking advantage of different stages of the refrigerant compression cycle. The number of heating...

Fan Coil Units

Fan Coil Units Direct Drive and Belt Drive Direct Drive Fan Coil Units (Blow Through) are available in three different models: HFC – Horizontal VFC – Vertical LFC – Lowboy Belt Drive Fan Coil Units (Draw and Blow Through) are available in three...

LAMIFLO Series

Lamiflo Series Integral Face & Bypass Coils Heating cold outside air with steam or a hot fluid is a risky business at the best of times; there is always a potential for a freezeup! But with steam of hot water, there is nothing better than Engineered Air’s...

UV Series – Unit Ventilators

UV Series Commercial & Institutional Unit Ventilator Unit Ventilators are made by the Heat Transfer Division of Engineered Air in four basic models, all in either draw through or blow through coil configurations. The four models are traditional vertical,...

VUH Series

V Series Vertical Unit Heaters Engineered Air manufactures the complete line of Horizontal and Vertical Unit Heaters with the following options: minimum 18 gauge (1.3mm) 304 Stainless Steel with Heresite coated coils and Totally Enclosed motors. The Stainless Steel...

HUH Series

H Series Horizontal Unit Heaters Engineered Air manufactures the complete line of Horizontal and Vertical Unit Heaters with the following options: minimum 18 gauge (1.3mm) 304 Stainless Steel with Heresite coated coils and Totally Enclosed motors. The Stainless Steel...

UPEW Series – Water Cooled A/C Units

UPEW Series Water Cooled Packaged Air Conditioners The UPEW Series of water-cooled packaged air conditioners provide a low cost, factory fabricated, cooling / air handling system requiring only a simple connection of the space thermostat and a supply of condenser...

NTM Series – Air Handling Units

NTM Series No-Through-Metal Air Handler Panels A premium engineered equipment panel system. Specially designed for low temperature air handling units to prevent condensation from forming on the exterior panel and to reduce heat gain or loss. Features a concealed...

LMK Series – Electric Heating Units

LMK Series Commercial & Industrial Electric Heaters Engineered Air’s LMK Series custom air handling units offer you the best of all worlds in designing your air handling system. Our LMK electric heat units incorporate our CENCON control via SCR modulation or...

LM / LMD Series – Air Handling Units

LM / LMD Series Commercial & Industrial Air Handlers Engineered Air’s LM / LMD Series custom air handling units offer you the best of all worlds in designing your air handling system. Combined with our custom coil manufacturing abilities the LM / LMD...

SI Series – TRI MED Oxidizer

SI-P Series Odor Removal for Commercial and Industrial Applications The SI Series Oxidizer units are self-contained air purification products designed to reduce high concentrations of odor and VOCs. They are a very economical solution, using minimal power consumption...

UVC Series – TRI MED UV Systems

UVC Series  EngA’s UV Centurion Lighting System Engineered Air’s UV-C Lighting System, UV-Centurion, uses the latest UV-C lighting technology to control surface mold and microbial growth on your Air Handling Unit’s (AHU) cooling coil, drain pan and...

HRG Series – Glycol Loop Coils

HRG Series  Glycol Run Around Heat Reclaim System A completely packaged system of heat reclaim including supply and exhaust blowers, heat transfer coils, filtration, supplemental heating, temperature controls and limits, and roof mounting frames. Combined with proven...

HRP Series – Heat Pipes

HRP Series Industrial Air to Air Thermal Recovery Units with QDT Heat Pipe Engineered Air’s HRP Series is an energy recovery package specifically designed to reduce the high cost of conditioning ventilation air by recovering a significant portion of the thermal...

CENCON

NEXTGEN CENCON  Digital Controller The CENCON controller is the advanced operational component for the majority of custom manufactured Engineered Air HVAC equipment. Various expansion modules (-XM) may be added to the CENCON to extend the operational capabilities to...

BASE

NEXTGEN BASE Digital Controller The Engineered Air Nextgen BASE controller is the primary controller used in custom manufactured Engineered Air HVAC equipment. Combined in one main module, the Nextgen BASE has all the capabilities required to control standard...

AF Series

AF & DCU Condensers & Fluid Coolers Air Cooled Condensers The AF Series condenser and fluid cooler is constructed of direct drive fans, whereas the DCU Series condenser and fluid cooler is built using belt driven fans. Both units are manufactured using heavy...

AIRTEX – Radiant Ceiling Systems

Airtex Radiant Ceiling Systems – The New Standard in Perimeter Heating AIRTEX LINEAR PANELS The Airtex extruded aluminum panels in lengths up to 16′ (4877mm) have changed the way North America heats its buildings. Clean durable Airtex Radiant Linear...

HERESITE

Heresite for Finned Tube Heating, Cooling and QDT Heat Recovery Coils Heresite baking phenolic coating has effectively demonstrated its value in protecting heat transfer coils from corrosive attack, thereby appreciably increasing equipment service life. The excellent...

RUVG Series – Gas Fired Unit Ventilators

RUVG Series Institutional & Commercial Gas Fired Unit Ventilators Riser Style Unit Ventilator HIgh efficiency indirect fired heat exchanger Two stage heating control or modulating (optional) ETL Certified (Canada and USA) Return to Unit Ventilators Features Heavy...

Heat Transfer Coils

Heat Transfer Coils Commercial & Industrial Heating / Cooling Coils Engineered Air high performance heat transfer coils have found wide acceptance in heating, cooling, dehumidification and heat reclaim applications, ranging from schools, churches, hospitals and...

EngFlo Series

EngFlo Series Forced Convection Radiators Engineered Air EngFlo forced convection finned tube radiation features high capacity in a small profile. Quality aluminum tangential blowers provide forced convection for those high heat loss areas. Engineered Air’s...

CUH Series – Cabinet Unit Heaters

CUH Series Cabinet Unit Heaters Engineered Air Cabinet Unit Heaters (CUH Series) are manufactured for versatility in any building. With dozens of different arrangements for vertical and horizontal mounting in exposed, semi-recessed or fully recessed configurations,...

C Series – Convector Radiators

C Series Convector Radiators View Brochure Due to continuous product development, specifications, dimensions and capacities are subject to change without...

Profile Series

Profile Series Finned Tube Radiation Solutions Enclosures The Engineered Air Profiles Series enclosure is produced in heights of either 8” (203mm) or 10” (254mm). The Profile Series enclosure is available in lengths from 2’-0” (610mm) to 7’ – 6” (2286mm) in 6”...

Finned Tube Radiation

WF Series Finned Tube Radiation Solutions Engineered Air’s WF Series Finned Tube Radiation provides a wide range of enclosure options for varying architectural requirements. WF Series comes in dozens of standard enclosure options (flat top/bottom, sloped...

Oxidizer 2000 – TRI MED Oxidizer

Oxidizer 2000 Odor Reduction System for Waste Water Applications View Brochure Oxidation Process Oxidation technology can be effectively employed to break down odorous gases formed in wastewater facilities or any industrial site that causes problems for those living...

HRA Series – Air To Air Plate Exchangers

HRA Series Packaged Heat Recovery with EngA’s TRP Air to Air Heat Exchanger Engineered Air’s HRA Series is an energy recovery package specifically designed to reduce the high costs of conditioning ventilation air by recovering a significant portion of the...

HRW Series – Heat Wheels

HRW Series Packaged Heat Recovery with EngA’s Total Energy Wheel Our custom manufacturing facilities allow us to incorporate HRW Heat Wheels into products such as indirect fired gas heating and mechanical cooling equipment. When providing 100% outside...

Operating Suites

Operating Suites Operating Suites in today’s market demand a lot of interface with the ceiling system. Engineered Air offers the perfect solution to customize the plenums with structural steel that allow the medical equipment to hang from, including boom mounts...

Cleanroom Plenum Systems

Cleanroom Plenum Systems Engineered Air’s Cleanroom Plenum System provides custom modules manufactured to facilitate ease of installation and the ability to fit into a confined ceiling space. These modules can be supplied with plenum fans, coils, integral LED...

Flush Ceiling Grid Systems

Flush Ceiling Grid Systems Engineered Air’s Flush Grid System provides a variety of options from our standard welded bottom load, top load and stainless steel grids to our economical stick-built ceiling grid systems. Our vast array of Flush Ceiling Grids can be...

DWD/HER Series – Gas Fired Desiccant De-humidifier

DWD/HER Series Gas Fired Desiccant Dehumidification Unit Engineered Air’s DWD/HER Series of fully packaged process / industrial units are ideal for removing moisture in a variety of applications, even in low humidity conditions. Fundamentals of Operation The...

SH Series – Gas Fired Steam Humidifier

SH Series Commercial & Industrial Gas Fired Steam Humidifier Engineered Air is the proven leader in combustion and heat exchanger technologies. Our high turndown burner and floating, stress relieved heat exchangers have been quality tested for over 25 years of use...

CD Series – Rink De-humidifier Units

CD Series Ice Rink Dehumidifiers Engineered Air manufactures a variety of products that can be used for dehumidification. Our CD Series of Ice Rink Dehumidifier units solve the condensation problems frequently encountered in skating and curling rinks. A common problem...

PD Series – Pool De-humidifier

PD Series Pool Dehumidifier Engineered Air manufactures a variety of products that can be used for dehumidification. Our PD Series of Pool Dehumidifier units cool, dehumidify and reheat air from pool areas. They can also incorporate heat recovery of the exhaust air...

MC Series – Modular Chillers

MC Series Commerical & Industrial Water or Air Cooled Modular Chillers The Engineered Air MC Series is a line of modular water-cooled and remote air-cooled chillers (packaged air cooled are available) that range in size from 20 to 80 nominal tons. They can operate...

FW/DJ Series

FW/DJ Series Mechanical Cooling / Indirect Fired Makeup Air Units A makeup air unit combining the economy of efficient indirect fired heating with mechanical cooling. The option blow through filter and evaporator coil eliminates nuisance trip outs due to frosting...

MZ Series – Multizone Units

MZ Series  Commercial & Industrial Heating and Cooling Multizone Units for new or replacement applications designed to meet the needs of the 21st century. Reduced energy consumption through:   up to 15:1 turndown with gas heat multiple compressors improved...

FW/EC Series – A/C with Evaporative Condensers

FW/EC Series Packaged Air Conditioners with Evaporative Condensers Engineered Air has developed the FW/EC Series of packaged air conditioners to meet the demands for lower air supply temperatures, in the 44°F – 50°F range, while meeting the operating...

CU Series – Air Cooled Condensing Units

CU Series Air Cooled Condensing Units Engineered Air Condensing Units are built to last in every application. From standard operating environments to low ambient operation and corrosive industrial applications. All models have been designed to operate efficiently and...